Description
Includes: 1x DV36DC 36V Brushless Impact Driver Drill 1x WH36DC (H4Z) 36V Brushless 1/4″ Impact Driver 1x G3613DVF 36V 125mm Brushless Grinder with paddle switch 2x BSL36A18 36V (5.0Ah) / 18V (2.5Ah) MultiVolt Battery 1x UC18YSL3 18V Rapid Charger with USB port 2x HiKOKI Carry Cases HiKoki DV36DC(H4Z) 36V Cordless Brushless Impact Driver Drill (Skin Only) Features: RFC (Reactive Force Control) – When the gyroscope sensor built in the controller detects a predetermined angle, the motor stops automatically to prevent excessive jerking of the tool LED Light warning signals occur with RFC and when the tool is overburdened or overheats Due to the highly durable design that is resistant to heat generation, it is difficult to stop even during continuous work. The side handle can be mounted in 11 different positions to improve workability. Compatible with the HiKOKI MultiVolt battery Specifications: Voltage: 36V Motor type: Brushless Switch type: Trigger Drill chuck type: Keyless metal chuck Chuck capacity: 1.5-13mm Light LED: White Clutch stages: 22 (Torque 1.5 -8.0Nm) Maximum Torque Hard Joint: 155Nm Maximum Torque Soft Joint: 100Nm No load speed – low 0-550rpm No load speed – high 0-2200rpm Capacity: Brick & Masonary: 22mm Steel & Aluminium: 20mm Wood hole saw: 118mm Wood self feed bit: 95mm Small screw: M6 Wood screw: M16 x 100mm RFC (Reactive Force Control): Yes Forward / Reverse Mode: Yes Dimensions (LxHxW) including the battery: 190 x 267 x 89mm Weight: 2.1kg Battery: Compatible with HiKOKI MultiVolt battery HiKoki WH36DC(H4Z) 36V 1/4″ Cordless Brushless Impact Driver (Skin Only) Features: High torque impact driver 5 Modes (Max, Bolt, Bolt Single, Soft, Self Drilling) IP56 dust & water resistance Triple Hammer for high efficiency 3 LED light provides more visibility in dark and compact areas Warranty: 3 Years Standard Warranty 6 Years Extended Warranty if registered online These products are designed to be resistant to dust and water. However it is not guaranteed that they will not fail. Refer to user manual for recommended use and maintenance procedures. IP56 Rating applies to certain tools only. Batteries and chargers are not IP56 Rated. Specifications:Power 36VMotor BrushlessCapacitySmall screw¹ 4 to 10 mm (5/32″ to 3/8″)Ordinary bolt 5 to 18 mm (3/16” to 23/32”)High tension bolt 5 to 14 mm (3/16” to 9/16”)Self drilling screw3.5 to 6 mm (1/8″ to 1/4″) in diameterTightening torque²Power mode215 NmBolt mode 215 NmSoft mode 76 NmNo-load speed (with a battery fully charged at 20C)Power mode0 to 3,400 min-¹Bolt mode 0 to 2,900 min-¹Bolt single mode 0 to 2,900 min-¹Soft mode 0 to 900 min-¹Self drilling screw mode 0 to 3,700 min-¹Impact rate (with a battery fully charged at 20C)Power mode0 to 4,100 min-¹Bolt mode 0 to 4,100 min-¹Bolt single mode 0 to 4,100 min-¹Soft mode 0 to 2,000 min-¹Self drilling screw mode0 to 2,200 min-¹Drive 6.35 mm (1/4”) bit holderType of switchVariable speed trigger switch with forward/reverse changeover lever (with brake)LED lightWhite LED (Always ON, Light only SW-ON, and Always OFF)Weight 1.6 kgDimensions (L x H ) 114 x 241 mm HiKoki G3613DVF(H4Z) 36V 125mm Cordless Brushless Grinder with Paddle Switch (Skin Only) Features The high power 1500W motor provides more productive work time Detachable filter as standard Paddle Switch Side handle can be mounted in 3 directions Toolless wheel guard Safety functions – Brake Function, Kick Back ProtectionSystem, Soft Start, 0 Voltage Restart Protection & Overload Protection LED status indicator Specifications: Voltage: 36V Motor type: Brushless Switch type: Paddle Brake Function: Yes 0 Voltage Restart Protection: Yes Soft Start: Yes Overload Protection: Yes Variable Speed Control Dial: Yes, 6 settings Kick Back Protection System: Yes Changeable dust filter: Yes Spindle Lock: Yes 3 Position side handle: Yes Light LED: Yes Grinding Wheel Ø: 125mm Ø Grinding Wheel bore Ø: 22.23mm Ø No load speed: 3,200 -10,000rpm Weight including battery: BSL36A18 3.1kg Dimensions L x W x H: 389 x 141 x 133mm Spindle Lock: Yes Battery Compatible with the: HiKOKI MultiVolt battery HiKOKI BSL36A18 18V-36V 2.5Ah-5.0Ah Li-ion Cordless MultiVolt Battery Features: 1080W Power and compact & lightweight (almost the same size and weight as an 18V BSL1850 or 60 battery) with 18,650 cells Automatic voltage change between 36V and 18V Remaining battery indicators displays the charging state in 4 stages Specifications: Voltage: 18V – 36V Capacity: 18V: 5.0Ah 36V: 2.5Ah Charge time: Approx 32 mins Dimensions (L x W x H): 116mm x 69mm x 76mm HiKOKI UC18YSL3(H0Z) 14.4V-18V Li-ion Cordless Rapid Battery Charger with USB Port & Cooling System Features: Cooling feature helps cool battery during charging or before charging commences to prevent battery overheating ensuring extended battery life Preventative mechanism against charging a hot battery to extend battery life 3 way overcharge protection system to ensure battery is not overcharged Two colour indicator light to indicate what stage of charging the battery is in USB port for charging mobile devices Specifications: Voltage: 14.4V – 18V USB ports: 1 Battery type: Li-ion Slide Charge times: 1.5Ah: 15 mins approx 2.0Ah: 20 mins approx 2.5Ah: 25 mins approx 3.0Ah: 20 mins approx 4.0Ah: 26 mins approx 5.0Ah: 32 mins approx 6.0Ah: 38 mins approx
Reviews
There are no reviews yet.